Comments on: An Invitation to a Discussion About a New Plaster Idea

By: Andrew

Andrew — Mon, 26 Oct 2009 23:03:33 +0000

That’s patience! Holy Cow! I had completely forgotten about this question. Sorry.
Having now reconnected with the concept, especially with the knowledge I’ve gained in the last year or so, I would not recommend this set up. I think the plaster would have a tendency to crack clear down to the straw, would be difficult to remove from the forms and would have a hard time holding the finish plaster due to the lack of “key” for the plaster to hold onto. In addition, the pressing back would be missed as well which really strengthens the plaster.

Hopefully I’ll answer any future questions a LOT faster than this one. Once again, sorry for letting you slip through the cracks.

By: greg vizzi

greg vizzi — Sun, 25 Oct 2009 02:58:38 +0000

Hi Andrew,

I’m still waiting for your comment 2 years later.

Greg

By: ImmeneJen

ImmeneJen — Thu, 29 Nov 2007 21:04:55 +0000

I am pleasantly amazed! Thanks!!!

The Regard! The Excellent forum! Thank you!

By: Greg Vizzi

Greg Vizzi — Sun, 04 Nov 2007 17:01:03 +0000

Hi everyone. Without having the experience of using lime plaster or strawbale construction I can only speculate about what kinds of challenges must be bridged to get a reliable “poured” lime plaster skin for a strawbale wall. My questions would be:
1-How soon could the forms be removed?
2-What would be the probable curing time for a 1.5″ thick skin?
3-Would the skin be prone to cracking and if so, how could that be prevented?
4-Could the forms be removed without pulling the plaster off the walls; wet or dry?
5-Can a finish coat of lime be applied to the smooth surface of the skin after it’s dry?
6-This method may or may not save time, but would it save labor? What do you think? Thanks!
Greg