蒸气障碍往往比他们创造更多的伤害防止稻草房子 。 那么,为什么他们在稻草建筑规范要求? 答案并不复杂,然而,对所有类型的家庭的影响是蒸气障碍。
推稻草家园,一直与透湿涂层提供包墙允许任何水汽逃脱建设。 在大多数情况下,这意味着进入地球就像基于粘土或石灰石膏。 这些膏药有能力释放蒸气,从而使包干的天气许可时。 水泥基合成或其他膏药有转移包防潮的能力有限。 在某些情况下,再根据天气或气候,包结束浸泡了从环境的湿气,这可能会导致在墙壁上的衰减。
因此,如果这是真的,包需要呼吸,并在表面应用的石膏可以影响从包的水汽输送距离,为什么会有人用水蒸气阻隔在所有? 因此,这里是简单的答案:因为这是人们对传统的家庭做什么。 因为大部分的稻草建筑物的代码语言是基于传统建筑守则,有些东西永远不会被测试之前,他们成为要求。 我已经建立了许多稻草家园和许多传统的家庭。 在这两种情况下,我觉得在项目的代码,真不感的个别情况,但是,代码的目的不是要解决的个别情况,但相当大,毯情况。 因此,我不得不争取什么,我相信,然后提供一些证明履约担保,或从一个工程师的类型。 虽然价格不菲,一个工程师的邮票是比失败墙系统的便宜。
我不使用我罢了墙壁上的水汽的障碍,除非我真的有。 在某些情况下,包可能被暴露在雨水飞溅或雪堆,我可能会利用水蒸气的阻隔材料。 在干燥的气候,我在所有不使用的材料,因为我相信释放水分的能力建设是比试图保持它的重要。 上面的图片显示在屋面形式的水蒸气阻隔感到应用于包的底部课程的一个例子。 在这种情况下,房屋检查员需要在墙上,其中风驱动雨雨是一个关注的暴露部分。 我肯定不换包下水蒸气阻隔。 这允许任何水分排入砾石免费的包在墙基。 不要混淆为与屋面认为有必要在接触到石膏木材的水汽阻隔的需要。 他们有很大的不同,石膏保护是绝对必要的,以避免在完成的裂缝。 感到屋面墙壁上的条纹是木材成员包括前抹灰。
多年来,我已经学会了,水分会得到你的房子或那种方式。 相信,否则,就像相信我能阻止下雨时,我想一个阳光灿烂的日子。 鉴于此,它更有意义的建立,使水分能逃脱,一旦得到。这是一个复杂的问题一个简单的答案。 事实上,有许多人,有公司研究的建设项目,这些研究点的结果,在传统的建设实践中的水汽障碍列入蒸气障碍的影响,花费无数的时间和货币。 因为有关于包家这些障碍的影响是有限的信息,我们的建设者,是留给我们的常识,我们可以找到什么样的信息。 我们知道的一件事是,水分可以造成不可挽回的损失以稻草房子。 知道了这一点,它是必要的,你做任何你可以从水和湿气,蒸气建立保护你的墙。 你究竟如何,将取决于主要的气候,建筑材料,机械系统的,和你的设计。
虽然没有具体涉及到稻草建设,佐治亚大学的蒸气家园,如何找到适当的平衡,你的家中的水分屏障使用提供了一个有趣的和比较完整的解释。 这是一个良好的跳跃在任何家庭中的水蒸气阻隔讨论的关点。 这里是一个信息的链接: http://www.fcs.uga.edu/ext/pubs/html/B924.html
作者简介
安德鲁·莫里森是在稻草和绿色建筑方面的专家。 他已经显示出成千上万的人如何建立自己的稻草项目通过了全面的系列教学稻草,混凝土基础,抹灰的DVD。 你可以检查在这些的出www.LearnStrawBale.com。
电子邮件更新
得到通知的新条目和稻草成功的电子课程“绝对免费得到我们的”7个必要的步骤 ,在下面的输入您的电子邮件地址然后检查,以确认您的收件箱。 更多信息>>








3月15日,2008年在5时52时
我们期待在今年夏天做一次总结,对现有的家庭。 我的妻子不喜欢的土坯外观和宁愿乙烯基壁板(我不明白,要么)。 我想一个办法做到这一点是传统的混合吹,把木格(空气空间的一对夫妇英寸)和附加的壁板。 有一个简单的方法吗? 有半permiable蒸气屏障,可能在这种情况下,工作? 至于你说的,有没有办法来保持水,但壁板将偏转降雨雪,如果没有水蒸汽。 顺便说一句,我们是在该国并没有代码来处理。
谢谢,肺心病
2008年3月17日,七点52分!
我不想看到你使用乙烯基壁板,因为它是这样一个讨厌的产品对环境的影响方面。 还有其他的选择壁板可用,如果你不想去用灰泥。 如果你的妻子喜欢粉刷,但不是圆润外观的Adobe,你仍然可以在外观上与包,石膏和简单的剪裁锐利的边缘。
如果你决定使用乙烯或其他一些壁板,你可能会想使用通风层之间的包和壁板。 我建议你石膏包大衣消防证明他们和你的建议,然后附上一枚迫击炮弹网系统(www.mortarnet.com)和水垢条。 问题附着水垢条状结构的房子。 你可能会最终花费太多的时间和精力,使这项工作做好。 它可能不值得做长途。
我最好的建议是建立与包,如果你喜欢的,总的影响。 再次,石膏可以完成,因此它看起来就像一个传统的粉刷房子,而不是一个土坯结构。 有时,它根本不值得一试,使包看起来像别的圈壁板是一个地方的地方是经常发生的情况。 遗憾的坏消息。
2008年3月18日4时23
没有坏消息我看来,与其说作为燃料,我们应该远离乙烯基壁板。 什么是最快的合理经济的方式申请的组合呢?
2008年3月18日6:09
最简单的方法适用于混合取决于你。 我宁愿在砂浆搅拌机搅拌后用手镘它。 有些人喜欢吹它与一台机器,然后再回到镘它。 去得更快,但你必须填缝保持喷雾运营商,而工作真快。 此外,本机可能很难找到和昂贵的租金。 最便宜的选择是使用当地的土壤,作为地球的石膏和手抹子上。 这需要时间和耐心,并要求当地土壤,足以作为石膏。 你需要的粘土含量高,但不能太高,以使这项工作。 我建议你拿起更多关于如何分辨如果您的土壤可以作为石膏用于描述一个自然的抹灰书。
2008年3月25日,4:37上午
您好安德鲁
最近购买了加密和抹灰您的影片,发现他们是非常激励和有趣。 这是我的希望,最终实现梦想的稻草捆在爱德华王子岛建设。 在我的研究中,我碰到一个tar文件不会被用于对木材,尤其是在热活跃的外部建议。 一些墙壁的解构过程中,模具被发现之间的TP和木材。 水分未能逃脱。 我不知道,如果木材被完全包裹或不。
在加拿大,我们似乎是VB,即使疯狂的一年半的VB是错误的一边墙。 R2000的房屋已被证明是模具打开时。
只是出于好奇,在你的DVD有石膏板滑录音和网状的抹灰。 内和外呢? 与该什么最多?
的问候,
DWD
3月25日,2008年六时53
戴夫,
我能理解多少水分会被困背后的屋顶觉得如果它被周围的木材包裹;然而,如果在水分充足的地区,为周围的边缘消散表面上,我将感到惊讶,如果生成是一个问题,在这种情况下。 我还没有见过这样的例子,是一个在任何房子的问题,我已经切成或拆除(只有一个拆毁日期!)。
在DVD的混乱,我道歉。 石膏板是唯一的墙壁上的一小部分,我做了一个被隐藏的面积为一块特殊的家具。 石膏板是在这一领域的螺栓的顶端。 哪里有包,我直接向他们的膏药。 上抹灰,抹灰的DVD。 再次,对不起任何混乱。
3月28日,2008上午4:10
你好
图片中的职位看起来是相当紧密。 您使用的是4×4篇文章? 它几乎看起来像你做了一个标准的2×4帧600毫米中心和缺口将它包墙...我想它更便宜的木材做...
干杯
蒙特卡罗
3月28日,2008年在9时12分上午
蒙,
墙上画中的使用4×4员额中心4。 这木材使用更小的碎片,并表示梁也可以是较小的一块(2 4×6×4板钉)的木材。 这加快了养在一个大的框架,并经常与窗口,减少多余的木材使用的安置工作。
2008年3月28日,2:59下午
啊......谢谢。 它使我有关的使用光帧strawbale建设的严重怀疑。 如果钉在21英寸的中心,然后包只需要一个2×4在中间的一方推到其他两个螺栓缺口。 它肯定会更便宜和较少的木材。 你知不知道这样做的人吗?
2008年3月28日下午03:04
我试图在一所房子,几年前,这是一个痛苦的对接。 我想保持我的心墙,在运行债券等,这意味着我的工作结束,所有的地方缺口。 我们结束了对边缘转向包和螺栓之间的馅,因为这是容易的,我讨厌堆叠墙整个长度的边缘上的包! 无论如何,它并没有为我工作的方式,我希望它会。
2008年3月28日,7:16 PM
嗯......我在想,如果你有正确的螺栓中心,那么它会工作。 如果你的包,然后是900×450 450螺栓的中心,应该是你唯一的缺口每个包中。 在实践中,我敢打赌,它不是很整洁也许是一个严重的头痛缺口每包。
2008年6月10日下午01:21
你可以使用玻璃纤维树脂代替水泥外吗? 我不认为这将是防火如水泥,但只是一个thought.I“不是一个建设者,却发现你的文章很有趣。 感谢崖
2008年6月10日7:51下午
悬崖,
我没有使用过的玻璃纤维,所以我不能给任何的反馈。 我很欣赏您的意见和有关的文章,希望你继续享受他们。
2008年6月13日,4:38下午
Hi Andrew, We are now really looking into what we are going to do to the outside of our house. It still has two coats of clay , sand and chopped straw but now that the spring rains have come the areas under the windows are erroding away….all the more reason to get our final coat on. Which we still haven't decided on. After talking with others we think that a natural lime plaster might still be too heavy and not allow enough moisture from inside the house to escape through the wall completely. It might set up a zone within the bales that is constantly wet (sorry can't remember the term for that area) any way it would then be prone to mold; especially in our winters. Would you recommend a silcone based paint to apply over the clay layer? It would be light and permeable to air but not rain. Or should we go with a lighter whitewash sort of layer and reapply every so often? We are hoping to have a low maintenance exterior and we now wish we had gone with a cement stucco. Now that our interior walls are all finished and coated with a natural clay though, we think the vapour would be trapped on the inside of the bales.
June 13th, 2008 at 4:39 pm
Sorry, also meant to mention that we did use the aformentioned many studs and many notches method and it did drive us crazy!
June 13th, 2008 at 8:11 pm
Maryann,
I would suggest you go with the lime plaster finish coat. The permeability of the coat is good enough to allow the moisture to move through. If you are looking for low maintenance, clay plaster exterior finish is NOT the way to go. That will require a lot of follow through year after year to keep it up. The lime is much more durable and should allow for the moisture to move through easily. Silicate paints are also an option, but not before you use the lime finish in my opinion.
安德鲁
August 22nd, 2008 at 12:37 pm
Has anyone ever used straw bales in the foundation to insulate. Then use cob on the straw to make a adobe floor. I'm not sure if it would need a vapor barrier are not. I'm going to be building a home in Alaska and it gets down to -45f there
August 22nd, 2008 at 5:35 pm
I would not recommend putting bales in the foundation as insulation. They will rot under the ground and/or exposed to snow drifts and will become a mess to deal with. Bales must be kept away form moisture so only above ground applications are a good idea.
August 25th, 2008 at 5:21 am
I'm sorry I said in the foundation I should have said on the foundation. The straw bales would be about a 18″ above the ground.
September 6th, 2008 at 5:13 pm
i plan on using tyvec on the bottom floor of my north wall which is 2 stories. also planning on 14 guage welded wire . will mixing/ set times be adjusted to account for different rate of set on straw vs tyvec ( a breathable vapor barrier)??
any problems with my plan? ( 620 bales in place)
September 7th, 2008 at 3:01 pm
约翰,
I don't personally like using Tyvek or any other material to completely cover bales in a house or on a story of a house. That said, if you decide to do that, make sure you have enough “tooth” for the plaster to hang on. The plaster will not adhere to the Tyvek. I assume you have no overhang on this side of the house to protect the first floor, thus the Tyvek. If you can add one to the design without messing things up, I would suggest that over the Tyvek. Of course, that may be impossible or impractical at this point.
If you have a good backing for the plaster, you can move forward as is and the set times will be similar in the end. The straw will take a little longer to cure, but not by much. You will need to mix the mud a little heavier (drier) so it can hold on the mesh with no straw backing. Again, for an entire story, I would use a different approach if possible or perhaps a different material. If the mesh is not structural (for the frame) then you might consider using stucco wire instead as it will give much more “tooth” for the plaster. Good luck.
September 7th, 2008 at 5:22 pm
i have a good size eve, but expect driven rain , and ice in the winter, on the lower story. its a post and beam infill,. and Im told that the 2X 4 wire is best to support against ” racking” of the frame..perhaps Ill add some smaller wire over that for more tooth on the lower floor. thankyou
November 9th, 2008 at 2:36 pm
Would it be possible to use straw bale construction on a mostly underground home? We had planned to use concrete blocks, but like the sound of the straw bales. We already have plans for drainage behind the back wall using drains and wondered if this might be enough with a good coating over the bales to be waterproof.
November 11th, 2008 at 1:15 pm
Jeanine,
No. That is the short answer. Bales under ground are not a good idea, even with adequate drainage. If you want to avoid concrete block, there are several “green” alternatives you can choose. Rastra block is one and there are others that currently skip my mind. A Google search will probably get you there. Good luck.
January 19th, 2009 at 6:34 am
Andrew,
I'm currently designing a timber frame with straw bale wrap home in the Adirondacks NY. I plan on using lime plaster inside and out with no metal lath or re-bar. What are your thoughts on the “no metal” theory and do you recommend a vapor barrier between the top of the foundation wall and the underside of the bales when the bales are sitting on a 2×4″ toe-up?
Also, have you used bails for the roof insulation?
谢谢,
戴夫
January 20th, 2009 at 8:42 am
I do recommend the vapor barrier beneath the bales if you are building directly on a slab. although the rock and/or insulation would isolate the bales from the concrete, it helps to keep the moisture level of the toe up space low. I don't recommend bales in the attic or roof assembly for reasons discussed in other posts on this blog. Non metal mesh is fine although not as strong as metal mesh for structural purposes.
January 20th, 2009 at 9:04 am
Have you experimented with not using any mesh and applying the plaster directly to the bails in a non-load bearing application?
January 20th, 2009 at 1:18 pm
I have and find that with all the shaping that takes place around windows, building corners, doors and niche, that I prefer to simply mesh the whole building in one swoop rather than piece together the mesh in small areas.
January 29th, 2009 at 11:18 am
您好! I have a quick question. Say I am up to plastering the walls on the inside and I want drywall inside is it still a good idea to first plaster and then add drywall or to just put up barrier and then drywall?
January 30th, 2009 at 9:26 am
If you plan to add drywall to the inside face of the bale walls, you will need to have framing to support that drywall. You should also add a scratch coat of plaster to the bales prior to adding the drywall. I STRONGLY recommend against using drywall inside. It is a very stale look compared to the plastered bales. More over, dealing with the window and door wells is very difficult with drywall because of the natural curve of the bales. If you box out the windows and doors to accept the drywall, they will look cave like and very boring. I recommend you shape and plaster the bales and forgo the drywall.
Also, the full wall vapor barrier is something I would not recommend as you are likely to trap moisture in that wall somewhere. It is much better to allow the walls to breathe as much as possible.
February 12th, 2009 at 6:59 am
亲爱的安德鲁
我是一个小的建设者。 我访问了欧洲几年的研究马粪纸啜饮。 我从来没有建strawbale,但总是发现建筑风格的吸引力。 我的问题,有你或任何你知道的,曾经用作外墙抹灰代替完成多元醇,大豆生物泡沫? 在我看来,有许多闭孔大豆泡沫,满足的关键技术要求,防止水分渗透,同时,仍保持透气。 应用的速度,用最少的劳动和劳动者的“DIY”的能力,缺点是材料成本的明显优势。 任何想法或见解?
2009年2月12日,7:14上午
您好条例草案。 我有另一名男子提同样的问题,同样的材料。 我不知道这件事了,我已经告诉其他。 我当然有兴趣了解更多信息。 你有什么网站,你可以发布到这里,让我们开始对学习吗? 谢谢。
2009年2月12日,7:58上午
您好,IAM仍然在您的信息,尽可能gatering开始之前,我与我的项目,一个小拉帕(我想你调用它的地方,你有你的理发师阙。)在这里,我将有我的braai阶段。 这将有双方的城墙,而其他双方将继续开放。 一面墙将是3米,长2.5米身高3.5米长。 我的问题是。 这将是错误的叠加包边的方式增长,而不是平的? 我将有土豆丝(砂砾)内外与upribht梁每隔1米以外。 我必使舒尔,捣烂和梁将propperly不变,并加紧向包中,为了给强度的墙壁。 我之所以想这样做,是因为墙壁是一个很短的距离,不是很高。 该框架将进行茅草屋顶。 我会也有圆形裸irion在hight墙,以帮助支持包的基础巩固。 我也会把包顶部扁钢,圆钢,拉包向下。
2009年2月13日,7:18下午
安德鲁,
我只是偶然看到这篇文章,虽然是有点老了。 我注意到,你蒸汽(蒸汽)在外观上,我认为你的意思是水分屏障障碍 - 尤其是在气候(俄勒冈州)。 我的意思是水分来自在外面,而不是从内部的水汽扩散。
我同意的理念 - “透气”的墙壁,这意味着蒸汽开放,不漏气,因为它表明 - 是为几乎所有strawbale的房子位置,正确的施工方法。 不过,我相信这是误导的建议,他们应该永远不会被使用。 就像你为什么相信在一个良好的踢脚爆管帮助,我相信,蒸气障碍是一些地方的必要性 - 例如,蒸汽淋浴,绿色住宅,高湿度和利用自然通风的地方(即(?) ,没有风扇援助),等我常常哼着,并hahhed约,我会用在浴室外墙淋浴strawbales。 如果我有一个伟大的球迷,知道大家(孩子)会使用风扇 - 也许这将是确定的 - 但我保守的一面说,水蒸气阻隔,将是一个更安全的赌注。
至于水分的障碍,我认为它有可能使用过防潮丝网,应通过防火等级 - 虽然我没有数据 - 我只对woodframed粉刷墙壁。
在我看来,我相信,在“好帽子和良好的靴子”的施工方法,在寒冷和潮湿的气候。 因此,我相信应该不是非常良好的保护,或与水分容忍熔覆覆层,墙基 - 当然留下draingage /干燥包的差距,“呼吸”。
无论如何,没有的意思是胡说,胡说,胡说,但想清除的东西,我的理解 - 伟大的网站,伟大思想和伟大的对话。
再次感谢,
杰米(温哥华,渥太华,安大略省建立我们的第一个strawbale房子)
2009年2月14日5时14分上午
亲爱的安德鲁
你可能也知道,喷雾闭孔聚氨酯泡沫已使用了几十年的平屋顶屋面材料。 可喷涂聚氨酯在创造各种不同的成品PSI优势密度。 泡沫喷上“propriatorial”,加热和喷钻机非常昂贵。 自40年代已遍布石油为基础的聚氨酯。
进入80年代中期的豆制品。 除了环保因素,也有其他一些独特的优势......基于生物手段水基清洁行动,极为重要的维持昂贵的喷涂设备时,也十分安全的喷雾器。 最大的大豆的生物基公司拥有以石油为基础的公司。 因此小的激励,促进了绿色和环保的豆制品。 好了,直到最后的疯狂商人疯狂的石油价格跳跃。 但事实是聚大豆的生产成本大大降低,在过去几年一个新的,成本远远低于加工发展。
可以制成适合用于室内腔之间的公式大豆泡沫喷雾应用,倒在“老建筑”的应用,屋面的应用程序,卡车bedliners,喷上的应用程序和结构。
大石油为主的厂家,“秋后算账”,如果将包括陶氏化学,孟山都,嘉吉,Bio-based/Bayer。 有很多规模较小的制造商,技术进入公共领域。
的小家伙,你可能要调查之一是,soythane.com / Soythane,他们已经开发出一个特别天真的技术含量低,喷涂适合机制为小体积DIY'ers的。
2009年2月16日,5:20下午
只要天气转晴,我们已经准备好,适用于基于石灰粉刷。 有任何“射手”或更快的应用程序的方法比巴掌和镘? 混合前一天申请的要求,使我们解除所有的灰泥至少3次,我不期待这个!
的是什么,这种大豆基材料? 条例草案告诉我们!
安德鲁,我们期待着您的答复!
February 17th, 2009 at 11:23 am
Some great conversations here. Thanks everyone for joining in. I will address a few different comments here.
Barnie,
Yes, that will work fine. I don't like building on edge for several reasons, but none that appear to exist in your situation so I think you will be fine proceeding as planned.
Jamie,
我听你的。 I do see where moisture barriers can be used and I still avoid them. I would rather build to not need to rely on a moisture barrier all together. For example, I don;t build bales on my exterior walls behind showers. I use a conventional wall with water isolation walls on either side to the bales. Much less risk. I build homes with large overhangs and gutters to avoid rain splash altogether. On multiple story homes, we use intermittent roofs to create the same protection and I also use hedges and other landscaping to minimize wind driven rain. I totally agree with the good hat good boots concept. I just think that vapor or moisture barriers can create more problems than they save.
February 17th, 2009 at 11:28 am
哎呀。 I hit the submit button too soon.
条例草案,
Thanks for the details about this system. I know several people have mentioned interest in getting more information.
约翰,
You do not have to mix and slake the NHL. That is a “best practice” idea. You can mix the plaster for a minimum of 20 minutes and apply it directly onto the wall. It will still do fine, just a little less workable than if you slake it. Most people will not notice a major difference between slaked and non slaked plaster. You can use spray guns to apply the material. Contact the folks at de Gruchy's Lime Works. You can see the gun on this page: http://www.palimeworks.com/lwus/default.asp?page=tools.html Let them know I sent you and they will ask you for my vendor code. You can get a discount on your purchase by using the code. If you plan to move forward and purchase the gun ($250 minus my discount) contact me offline for my vendor code.
February 17th, 2009 at 4:59 pm
great information !! i thank you all for the input and related comments. i also have questions concerning placing shower/kitchen on bale walls, and am planning on using limited amounts of ” wall board” or concrete drywall where sinks and showers are going to be placed. tell me more about spacing for venting. i was planning on placing one or two 4X8 pieces to protect a corner shower, (both walls bale). i am open to your recommendations.. 。 how does one contact you off line? feel free to send me an e mail. again thanks for the info
February 17th, 2009 at 5:57 pm
Andrew,
It appears that you place your post and beam structure to the outside of the bales. Is this a preference or does it just work best for the roof, window, and door structures? I thought that I would place them on the interior to expose them (the look) and not have any differential strinkage problems on the exterior – interior is not subjected to the same temp./humidity fluctuations. Other opions are to hid them in the middle, but I assume that is a pain to knotch. Or, place them, knotched, on the inside and outside, like a ladder (I can't remember the technical term).
Thanks again for the advise,
Jamie.
February 18th, 2009 at 10:38 am
Hi John. I have a whole blog entry about this subject that I think will clarify your questions for you. Do a search for “Water isolation walls” at the top of the home page making sure that “strawbale.com is checked before you search.
February 18th, 2009 at 10:40 am
Jamie,
I prefer to put my frame to the outside for the reasons you named; however, it is very possible to place that frame to the inside so it can be exposed. Don't try the center option as it will drive you nuts. There are some other posts in the blog about placing your timber frame on the interior. Take a look and you will find some important details about how to accomplish this well.
February 18th, 2009 at 12:16 pm
Andrew,
Have been wanting to attend your workshop, but wanted to make sure that building with strawbale is feasible in my area (Mississippi)due to temp and humidity. It is on my farm, no permits required, just hot sticky days in the summer, cold wet during the winter. Figured large overhangs, positioned correctly, slab….. The zip code is 38901, any concerns or advice?
February 18th, 2009 at 3:01 pm
您好布赖恩,
你有没有得到任何干燥的天气,你想建立的? 我会关注墙内水分问题,如果是从未有机会为他们干出。 正如你可能已经读以上,在其他地方,在博客中,找出如何转化为水分含量相对湿度是困难的。 测试壁可能是一个好主意。 建立并让它坐了一年。 然后,您可以监视或推倒墙,看看是否成功或失败的迹象。 希望有所帮助。
2009年3月1日起,8:33上午
您好安德鲁。 感谢您的回答。 请提供更详细的原因,为什么你不喜欢与包朝上。 请,什么是之间的石灰抹灰和水泥,石灰和沙子plstering好混的差异。 我来accross人做way.I不是一定量的沙子,石灰和水泥,他们使用。 它可以工作,如果我有一个问题,以得到正确的石灰。
3月2日,2009年于下午3时25分
当边缘,包串的方式开槽周围职位或创建装饰利基的。 面对暴露罢了,更滑,不举行石膏。 包是中心,即身高比他们大,所以它们不是作为稳定。 这些是主要的原因。
我喜欢石灰和沙子,不仅是因为它更灵活和呼吸比水泥基灰浆更好。
2009年4月7日7时17分上午
我和妻子正在建设的1200平方英尺客舱/阁楼。 我们希望将其纳入家庭稻草,但没有很多的“救命稻草”,在本地区和自己之间的经验,甚至更少的有经验的承建商,我们已经决定去同一个框架稻草填充家。 我们希望有上家雪松壁板上使用的所有内墙,没有水暖的strawbales。 我正打算承办的框架,屋顶,把整个房子的雪松壁板,然后我们将尽自己的内部工作的广大。
我们将能够得到同样的保温优势和隔音内墙,虽然不是18“厚包的程度,如果我们说4-6”chainsawed的包内框架,而不是在保温和石膏板被炸?
也为是与外部雪松双面墙平行的内墙,会是足够的石灰石膏包的背面和东西的地方,他们然后完成石膏面临的室内墙壁? 我需要离开几英寸之间的雪松和“绝缘”稻草墙“气隙”? 任何意见或建议,将不胜感激。
2009年4月27日,10:33上午
您好贾斯汀。 这是一个艰难的一个。 如果我读您的文章,你想拥有室内草捆墙壁说,像一间卧室和客厅之间。 这占用了大量空间。 然后,我看到你正在考虑使用chainsawed包,使他们更多的空间高效。 我认为这将是一个浪费你的时间。 出标准的绝缘的厚度,就可以得到一个更好的绝缘值。 在声音方面,它穿过螺栓,所以如果你想消除它,你需要建立英寸的空气空间分隔两堵墙或使用隔音材料。
对于外墙,我想你会发现它更容易安装到帧(屋顶),然后石膏与打底墙的外部面,包打底干燥后,再安装雪松。 你可以使用雨熨平安装与发泄之间的包,护墙板,以取得最佳效果。
3月13日,2010年在7点38!
我想获得domme像这一个! 更多像这样的职位?
2010年3月16日下午09:53
您好安德鲁。 我住在华盛顿州西部奇黑利斯河上游谷地。 我有2个问题。 我有一些橡木原木,我想用建立一个简单的故事2山墙谷仓风格的家居,但在这里没有人是高档硬木认证。 其次,Strawbale吸引我,泥滑,因为经济的简单叠加和牵制捆在一起。 但是,高湿度是共同这里一年中的大部分,因此,自然发火,对我来说是的concearn,因为它是存储在他们的谷仓,并使用他们的动物,它的当地农民。 所有这一切,你会说什么。 谢谢。
艾伦
3月19日,2010在8:43上午
您好艾伦。 我会建议对木材分级的本地工程师交谈。 我想会有人知道的认证评级公司。 你也可以跟较大的本地木材公尺,甚至直接去附近的工厂(如果有)。
在湿度方面,我说雨或潮湿的吗? 我知道在西雅图和惠德贝岛的几个秸秆包家,和那些做精。 如果你是类似的天气中,你会好起来的。 我会建议您使用在您的设计的整个房子除湿,以帮助保持水分移动的家。
2010年7月1日起,4:28下午
喜欢的网站,优秀的文章。 添加饲料和将返回阅读更多。 领导虽然,你的页脚是Safari浏览器上安装Windows 98时,那副。
2010年7月2日下午07:55
感谢元首。
安德鲁
2010年7月27日,11:58上午
发现这个博客,所以我认为它更好地在这里问。 我有两个水和设计有关的问题。 我住多伦多以北,并建议考虑比稻草石膏木壁板。 我听说你的博客,您的壁板的主要意见,似乎是与安装所需的劳动。 石膏可以承受我们的气候在这里,或壁板是一个好主意。 我看你有一个车间,在渥太华,在那里他们有更多的雪,雨,湿度和温度比这里的极端问题。 完成,你将如何使用有。 我希望我有时间去。
其次,我被告知,有strawbales重叠的混凝土基础,所以,有一个滴灌,即一个14英寸宽的混凝土梁,支持18个“包边。 您的DVD显示strawbales实际上混凝土边缘的短,使石膏与混凝土平齐。 必须有大量雨水比较多,你在哪里比这里因此,我想你有信心,不需要滴灌边缘? 两种方法有何评论?
谢谢
瑞安
2010年9月5日下午12:36
您好瑞安。 我相信在一个坚实的石膏大衣。 石灰石膏已在英国取得了巨大成功的世纪。 作为合适的材料只要运用得当,我相信它。 我发现壁板安装一个包房子疼痛,我认为这是不必要的。 然后,如果你想看看,通过各种手段,为它去。 只知道它会采取一些额外的工作,这样做的权利。
I prefer to run my bales flush with the exterior these days and use a J-Channel/plaster screed to overhang the foundation by 1″. This stops wind driven rain from getting under the toe ups and it allows for a drip edge of sorts as well. It also gives a much cleaner finish than trying to make the plaster flush with the foundation as shown in the DVD. That detail IS required if you plan to use the mesh as your shear strength as the plaster needs to bear on the foundation directly to resist the lateral forces. I have started using other shear methods as a result and believe I am having much better success with them.
The project in Ottawa will be plaster. I still have one spot left in the workshop…maybe that's for you!
December 29th, 2010 at 12:13 pm
Enjoy the site. Lots of wonderful information! I am located in South Central Mississippi. I too am interested in constructing a SB home; however, I am concerned about our humidity. I am aware of one SB home in MS, located about 3 to 4 hours north of here.
January 10th, 2011 at 8:34 am
We have recently viewed your new Post & Beam construction DVD. Lots of good ideas, but some questions come to mind including the use of roofing felt along the bottom outside edge of bales. My questions are: 1) by isolating the stucco from the bottom 3 feet of the straw wall, would this not weaken the stucco wall? I've always understood the bond between the stucco and the straw fibres is what gave it strength. 2) would you not stitch through this 3 foot water barrier? If no stitching is present in this area, would that also not weaken the structure? If you do stitch, you poke holes through the water barrier. Have you heard of a glue/water mixture being applied to the outside of the scratch coat of stucco in that lower area as an alternative to the roofing felt water barrier?
January 11th, 2011 at 11:15 am
Good points/questions. I am not a big fan of using the roofing felt on the structure for just the reasons you outline; however, the use is often required by the building officials and so I have included that in the video. The strength is not effected too badly because the mesh holds the plaster and gives it some good strength. The sewing is completely necessary and so, yes, the barrier is punctured anyway, thus making it somewhat useless in the end. It's one of those silly code requirements that does not really make sense in reality. I like the idea of using a water/glue mix on the plaster, but have not had experience with it myself. I would be concerned about how that would effect the bond of the brown coat to the scratch coat as well.
January 22nd, 2011 at 8:30 am
您好! i'm looking to build a passive solar earthbermed home, and would like to build using straw bales. I'm worried about the earthbermed part, how to seal out moisture, while still retaining breathability. 这可能吗? i can't seem to find a good design.
January 24th, 2011 at 10:35 am
The earth bermed part should not be straw bale as it will not do well below grade. Other than that, the inclusion of proper drainage and waterproofing is essential. There are a lot of products out there, most of which are good quality but less than “non-toxic.” It may be a trade off for long term health: ie a less than green product up front allows you to build a long term green house. There are some plastic sheet designs, some with rubber membranes, that work well and are about the most green available. 祝你好运。
March 3rd, 2011 at 8:42 am
Certainly worth you discussing this educational write-up. 太棒了!
April 29th, 2011 at 10:24 am
Hi Andrew,
Thanks for answering all of these questions over the past couple of years. I see a few questions that touched on an area I am having a difficulty working through.
我为我的家人和我自己的家园建设的规划。 这听起来有点过分,但将是一个惊人的农场时,我们正在做。 (我真的)我推到使用Strawbale建设,但我们不希望有上无论是内部或外部的石膏光洁度。
我们想利用的石头上贴上外墙至少几英尺以上级的属性,我们仍然在做什么上面,辩论。 如果有足够的石头,我们不反对将所有的方式到屋顶(他们将是一个故事院)。 我们也希望保持室内的墙壁,管道和电气工作了,这样的维修就可以容易地。
我将构建自己的4×8,可以很轻松地获得管道和电气工作小组删除。 这意味着将有至少几英寸的空间插图中的螺栓墙和我的石材和木内饰板。
我的问题是我们如何可以让稻草包呼吸,如果我们在外面的石头。 会有包(内外)只是一个简单的石膏涂料。
我们应该留下的外框和石头,以便空气流通之间的差距吗? 和你发泄通过屋顶通风口?
2011年10月13日,9:19上午
喜奔。 为迟迟抱歉。 您可以添加岩石,只要正确面对包你有比较大chinking(关节)之间的透气砂浆,石灰最好的石头。 我想离开所有的管道内墙,出的稻草,只有把它包墙,如果你有。 在这种情况下,我会框架,整段墙和框架面积的管道,无需再次接触的秸秆,。 如果你想离开包和石头之间的差距,你可以,但是这意味着更多的物质的使用。 您将需要提供这方面的屏蔽通风和一定滑倒在双方的大衣包。
2011年11月26日上午在11点37分
我想这一点,但有几个问题:1。 我可以代替小麦淀粉? 不想购买全包,只用4 tablespoons.2。 量杯和勺美国吗? 在澳大利亚,杯=250毫升1,而在美国,它是235毫升。 我没有美国的计量器具。
2011年11月29日上午在8时53
您好诺拉。 测量是在美国的校准。 您也可以替换为小麦糊白胶(埃尔默胶在美国)。 1仅供参考,我来西部Wyalong八月教稻草研讨会于3月和珀斯。 如果您想了解更多有关的类,请访问http://www.strawbaleworkshops.com 。 希望看到你!
2012年1月1日起,在下午09:57
您好,请问您的想法是在水蒸气阻隔时在加拿大北部地区的建设。 像温尼伯MB的,或里贾纳SK,或埃德蒙顿,AB左右。 在这些领域得到雪,今年5-8个月。 一般来说,瓢泼的大雨是不常见的,虽然有雨,或多或少取决于该地区在夏季,。 然而,它不下雨所有的时间,也不是总是潮湿的。
因此,蒸气的墙壁,地板,屋顶上的障碍是什么? 将石灰涂料层是一对夫妇,足以承受雪呢? 为基础,地板,你有什么建议?
2012年1月2日,2:53下午
您好林恩。 但现在超过了包,我会建议在地板和屋顶的蒸汽障碍。 相反,使用三个大衣(最小)应用优质石灰石膏。 这将提供充分的保护和对元素将使墙壁自然移动蒸气(石灰将作为在一定程度上的水蒸气阻隔)。 务必密封各地电器插头和其他墙壁穿透墙与地板和天花板的差距。 地板可以是任何东西,但我建议具有很高的热质的东西,以帮助储存热量。 基金会将取决于当地的地质,所以我真的不能对此作出评论。
2012年2月6日上午在7:19
您好安德鲁
所以...我建立一个除了我家,(288sq.英尺后和梁控股屋顶)。 我住在北卡罗莱纳州的山前,在夏天的湿度水平,定期80-90%,在这样的气氛中,是有可能用稻草建造和使用石膏以外没有水蒸气阻隔?
2012年2月6日上午8时56
我绝对没有水蒸气阻隔石膏以外的建设。 我也建议您使用石灰石膏,以帮助减轻湿度。 最后,我建议你安装一个能量回收通风机,这实际上将吸取水分,空气和倾倒的房子外。 另一个的石膏选项是粘土/瓦石膏;然而,在潮湿的气候在外观上是很难保持。 这是一个梦幻般的石膏处理与湿度,如果你能保护它从元素(雨最显着的)。
2012年4月19日,12:56下午
问题:
建立一个哈比人回家! 地板上的小矮人家将如下:
压缩的污垢
水蒸气阻隔
斯特劳贝尔斯
木托盘
我们需要什么水蒸气阻隔,并适用于它的最好方法是什么??
谢谢!
2012年4月29日,6:36下午
嗯。 我不知道,因为我不把包在我的地板肯定。 我用在定期地坪施工和水蒸气阻隔下砖6mil塑料,这样可能会奏效。 您可能需要的东西更像是一个密封的池塘衬垫......不知道。 祝你好运,我希望你发送照片!!
2012年5月3日,在9:06上午
将有一定照片
太谢谢你的答复! 试图找到网上的信息是压倒性的 - 有这么多的想法!! 我会考虑你提到的,让你知道我们最终使用的。 感谢您的帮助!