You’re invited to a special event! Join us at a two-day plastering party/workshop at a beautiful home we recently baled during a seven-day workshop in Temecula. The county was not willing to let us plaster until they had completed another inspection, and now that inspection is done. We are ready to throw some mud!! HERE […]
Tag Archives | Lime Plaster
Adding utility lines to your wall after plaster has been applied to your straw bale house is not as hard as you might think. The sooner you realize your mistake (leaving out the utility line) the easier it is to fix. If you’re wondering what I’m talking about, consider this: You raise the bale walls […]
I recently asked my friend Michel Couvreux of TransMineral, USA to write a guest piece about lime and the many confusing aspects of choosing and/or working with the right material for a straw bale house.
As the workshop season continues on, you may be wondering what it’s like to experience a seven day, hands-on workshop. This new video will give you a delicious taste of what it’s like. As I’ve heard many times from participants: “It’s so much more than just a workshop.” I hope you will join me at […]
The importance of protecting natural plaster can’t be over stated. It’s not the same as conventional stucco and it needs specific conditions for application.
In this article I discuss using American Clay plaster over a Natural Hydraulic Lime plaster, making sure that cure times are accounted for.
Plastering has a lot of challenges to it from mixing recipes to application techniques. Some challenges may not be obvious from the start, so be sure to spend some time learning what you need to know before you jump in. Today I spoke with a client who had spilled Natural Hydraulic Lime (NHL) all over their […]
I am currently accepting host applications for the 2017 straw bale workshop season. If you hope to host a workshop on your project, please apply today.
If you are interested in straw bale construction and live near Gravette, Arkansas, then you will want to join us for a FREE three-day crew training on May 24-26, 2016.
When acid staining concrete floors, it is very important to properly mask off walls and doors so that none of the stain gets onto places where you don’t want it. One of the hardest surfaces to protect is unsealed plaster.